Re: Inlet pipe couplers


Jay Scheevel
 

I am also curious about this hose type. I will add to the request.

I am also wondering why Jabiru uses a brittle sealant to seal the base of
the inlet pipe where it fits into the manifold. It seems like this is an
invitation to a leak. Would it make more sense to seal with a silicone
sealant or similar, like Loctite 510.

Jay

-----Original Message-----
From: main@JabCamit.groups.io <main@JabCamit.groups.io> On Behalf Of Mick
O'Connor via groups.io
Sent: Tuesday, February 23, 2021 4:07 AM
To: JabCamit <main@jabcamit.groups.io>
Subject: [JabCamit] Inlet pipe couplers

Anyone used fuel resistant silicone hose for the couplers ?
If not, is it just standard A1/A2 32mm fuel hose ?

Mick

Join main@JabCamit.groups.io to automatically receive all group messages.